FC H7-Lite 4–12S

The Amelia FC H7-Lite is a premium-segment intelligent flight controller specifically designed for high-load multirotor platforms. A key technological advantage of the device is its direct support for onboard voltages ranging from 5S to 12S (up to 54V+), which eliminates the need for external power modules (BECs), simplifies the drone’s architecture, and enhances the system’s overall fault tolerance.

Specifications

• MCU – 32-bit STM32H743 processor running at 480 MHz
• Professional-grade epoxy resin for mechanical reinforcement
• Single-sided SMD component mounting
• IMU – ICM-42688-P
• Barometer – MS5611
• OSD – AT7456E
• Compatible with Windows, Linux, iOS, and Android
• Compatible with Ardupilot, iNav, Betaflight, and RotorFlight software
• 6x UART (UART4 with RTS/CTS support)
• 1x CAN
• 1x I2C
• 1x microSD card slot
• 8 PWM outputs supporting DSHOT, MultiShot/OneShot/Proshot/PWM, etc.
• 1x JST-SH1.0 10-pin port for ESC (4-in-1 ESC)
• 1x JST-SH1.0 6-pin VTX port (for HD systems such as DJI, Walksnail, HDZero, OpenHD)
• Battery input voltage: 5S – 12S
• ADC voltage measurement input
• ADC current measurement input
• BEC 12V 3A for VTX
• USB Type-C
• Mounting holes 30.5 x 30.5 mm (and 30.5 x 43 mm) / Φ4 mm with Φ3 mm bushings
• Dimensions – 37 x 49.5 mm

Key advantages

• “Universal 5S–12S Power” – Direct support for up to 12S power without external BECs.
• “Premium Bosch Sensors: Barometer and IMU” – High-precision sensors for perfect positioning and in-flight stability.
• “Ultra-slim Board Profile” – Single-sided component layout makes the controller extremely thin for compact builds.
• “Dual Interface: Solder and Plug-and-Play” – Redundant pads and connectors for installation flexibility in any scenario.
• “6 UART Ports and CAN Bus Support” – Maximum peripheral compatibility for complex UAVs.